High toughness anti puncture Tubeless Vacuum Tire Rim Tape for MTB &Road Bike

Short Description:

Our Tubeless Rim Tape uses polypropylene as carrier material coated with natural rubber adhesive. The high toughness and enough elasticity tubeless rim tape can prevent your bike tires from puncturing by glass, thorns, nails or other sharp items. It can withstand maximum air pressure on road bike.

We have different size to meet different types of MTB and road bike, which are 21mm, 23mm, 25mm, 27mm, 29mm, 31mm with length 10meter or 50meter for options.

It’s very quick and easy to install, just stretch the tape over your rims, and press the tape along side the rim. It can be easily peel off without residue glue on the tire when you want to replace a new one.

Send email to us Download as PDF

Product Detail

Product Tags

Features：

1. Polypropylene film carrier

2. Natural rubber adhesive

3. High toughness and anti puncture

4. Weather resistance

5. Various size available for choice

6. 21/23/25/27/29/31mm x Length 10m Roll

7. Easy to install and replace new one.

8. Protect your bike from puncturing by glass, thorns, nails,etc.

As the MTB&Road bike is very welcome by those cycling lover, then it become very important to improve the tubeless tire riding experience. A good rim tape can ease the tubeless assemble processing and also prevent flats or leaks when cycling bike on mountain.

Most of the best mountain bike wheels will come with rim tape pre-installed in the factory, but sometimes you may also want to replace a new and best rim tape according to your personal riding experience. Then our high quality tubeless rim tape would be your most suitable choice to improve your riding experience.

HOW TO INSTALL TUBELESS RIM TAPE:

1. Select the correct sized rim tape to match up with the width of your wheel's rim
2. Clean your rim to make sure no dust, no residue on the tire.
3. Pull out the rim tape and press down on the opposite to your valve hole
4. Use your thumb keep pressing and holding down the tape.
5. Rotate the wheel and continue the step three to apply the tape
6. Leave an overlap around 10-15cms once you finished all the way around the rim.
7. Check around the wheels, to see if any bubbles or gaps, and press them down firmly.
8. Push the valve through the rim hole and secure with the 'O' ring and locking ring