• Ekwentị: +86-13400652499
  • Email: fanny.gbs@gbstape.com
    • English

    Ngwaahịa

    • GBS teepu
    • Ihe na-egbochi ọkụ na-egbochi teepu anụ ahụ akụkụ abụọ maka mgbanaka Membrane

      Ihe na-egbochi ọkụ na-egbochi teepu anụ ahụ akụkụ abụọ maka mgbanaka Membrane

       

      GBS na-egbochi ire ọkụteepu anụ ahụ nwere akụkụ abụọna-eji anụ ahụ dị gịrịgịrị dị ka onye na-ebu ma kpuchie ya na nrapado ire ọkụ na-enweghị halogen gburugburu wee jikọta ya na akwụkwọ ntọhapụ.Site na adhesion siri ike na mgbanwe, a na-etinyekarị teepu anụ ahụ okpukpu abụọ na-ekpuchi ọkụ na ndozi na njikọ nke mgba ọkụ akpụkpọ ahụ, nhazi batrị lithium, na-edozi panel mkpuchi ọkụ maka engine ụgbọ ala.Ọ nwekwara ike iji ihe ndị ọzọ dị ka Foam, Eva, PC, PP zute ngwa ụlọ ọrụ dị iche iche.

      ajujunkọwa
    • Teepu Sublimation na-eguzogide okpomọkụ dị elu maka Bipụta Sublimation Tumbler

      Teepu Sublimation na-eguzogide okpomọkụ dị elu maka Bipụta Sublimation Tumbler

       

      Nketeepu Sublimation na-eguzogide okpomọkụa na-eme ihe nkiri polyester wee kpuchie ya na nrapado silicone dị elu.Site na elu dị larịị na mkpuchi dị elu, ihe nrapado silicone siri ike dị mfe iji nagide ya na-enweghị ihe fọdụrụ mgbe ịchachara ya.A na-ejikarị ya ejide akwụkwọ mbufe ebe ọ na-ebuli elu n'ọtụtụ ihe gụnyere iko seramiiki, taịlị, ihe nrite ọla, uwe elu polyester, paịlị òké.Ọ nwere ike ibelata mbelata ka esichara mmiri ma na-ewepụkwa mkpochapụ mgbe a na-ehicha ya.The sublimation teepu bụghị naanị adabara sublimation na kọfị iko, ma adabara okpomọkụ nyefe vinyl na T-shirts, ohiri isi, uwe, akwa, na nwekwara ike tinye n'ọrụ maka ọtụtụ ụdị N'onwe Gị oru ngo.

      ajujunkọwa
    • Ihe nfefe ọkụ nke Poylimide Sublimation maka Sublimation na kọfị kọfị, ọrụ HTV na akwa T-shirt.

      Ihe nfefe ọkụ nke Poylimide Sublimation maka Sublimation na kọfị kọfị, ọrụ HTV na akwa T-shirt.

       

      Nkesublimation okpomọkụ teepuA na-eme ya site na ihe nkiri polyimide dị ka onye na-ebu ma kpuchie ya na nrapado silicone.Ọ dị mfe ịrapara na ọ dịghị mfe ịgbaji mgbe ị na-ehicha ya.Ọ dakọtara na oke okpomọkụ ruru 280°C (536°F).Ọ na-enye ezigbo nguzogide okpomọkụ na ihe nguzogide kemịkalụ, ọ dịkwa mfe ịpụpụ ya na-ahapụghị ihe fọdụrụnụ.Enwere ike iji teepu nka na-eguzogide ọkụ kechie ọbụna ebe na-ekwekọghị ekwekọ.Teepu mbufe ọkụ na-arụ ọrụ nke ọma na kọmpụta kọfị kọfị, igwe ọkụ ọkụ, ngwa T-shirt ma ọ bụ mbipụta mbufe thermal ọzọ.

      ajujunkọwa
    • Ihe nkiri mwepụta Teflon FEP na anya anya maka DLP SLA 3D Printer

      Ihe nkiri mwepụta Teflon FEP na anya anya maka DLP SLA 3D Printer

       

      Ihe nkiri FEP(fluorinated ethylene propylene copolymer) bụ ihe nkedo na-ekpo ọkụ na-agbaze extrusion nke FEP resin na-adị ọcha.Ọ bụ ezie na ọ bụ ala na-agbaze karịa PTFE, ọ ka na-ejigide a na-aga n'ihu ọrụ okpomọkụ nke 200 ℃, dị ka FEP bụ n'ụzọ zuru ezu fluorinated dị ka PTFE.N'ihe karịrị 95% nnyefe ọkụ, FEP Film na-eme ka nkwụsi ike dị elu nke ọkụ ọkụ UV gwọọ resin mmiri n'oge usoro obibi akwụkwọ niile.Ọ bụghị mkpisi ma nwee ọmarịcha ọkụ eletrik, nkwụsi ike kemịkalụ dị elu, esemokwu dị ala, ọmarịcha ihu igwe ogologo oge yana ezigbo ọnọdụ okpomọkụ dị ala.A na-etinye ihe nkiri FEP na ngwa nbipute DLP ma ọ bụ SLA 3D, ma tinye ya na ala nke VAT mbipụta n'etiti ihuenyo UV gị na ihe nbipute 3D iji mee ka ụzarị UV banye wee gwọọ resin.

      ajujunkọwa
    • Ihe akara mbufe ọkụ polyimide dị elu maka nsochi koodu mmanya PCB

      Ihe akara mbufe ọkụ polyimide dị elu maka nsochi koodu mmanya PCB

       

      Anyị polyimideelu okpomọkụ akarana-eji ihe nkiri polyimide 1mil ma ọ bụ 2mil dị ka onye na-ebu ihe mkpuchi acrylic na-enwe mmetụta dị nro.Ọ nwere ike iguzogide okpomọkụ dị mkpụmkpụ ruo 320 ° na ogologo oge okpomọkụ ruo 280 °.Ọ nwere ezigbo nkwụsi ike thermal, nguzogide mmiri na ezigbo mbido mbụ, nke enwere ike itinye ya na ngwa dị iche iche dị ka PCB Board nsuso, nsuso koodu mmanya ndị ọzọ, nchebe elu na masking dị ka ihe mkpuchi ebili mmiri, nhazi SMT, batrị lithium ma ọ bụ mkpuchi mkpuchi mgbawa. .

      ajujunkọwa
    • Ihe nkiri Ultra-Thin Nano Airgel nwere 0.02W/(mk) arụmọrụ dị ala maka mkpuchi ọkụ.

      Ihe nkiri Ultra-Thin Nano Airgel nwere 0.02W/(mk) arụmọrụ dị ala maka mkpuchi ọkụ.

       

      Mgbe mmeghachi omume nke ngwọta kemịkalụ gasịrị, airgel ga-etolite dị ka collosol nke mbụ, wee megharịa gellatinization ka ọ bụrụ aerogel.Mgbe ewepụchara ọtụtụ n'ime ihe mgbaze na gel, ọ ga-enweta ihe dị ala njupụta cellular nke zuru-gassiness ohere netwọk Ọdịdị na siri ike-dị ka ọdịdị, njupụta dị nnọọ nso ikuku njupụta.TụnyereAirgel chere, Ultra-mkpaihe nkiri airgelbụ ụdị ihe nkiri ihe nkiri na-agbanwe agbanwe nke nwere oke ikuku thermal conductivity nke sitere na airgel dị mkpa na-emeso ya site na usoro pụrụ iche.Site na njirimara mara mma nke obere okpomọkụ na mkpuchi okpomọkụ, ihe nkiri airgel nwere ike dozie nsogbu nke ikpo ọkụ nke ngwaahịa ndị na-azụ ahịa na obere oghere, ma na-enye nchebe mkpuchi okpomọkụ maka ihe ndị na-adịghị ike na-eguzogide okpomọkụ.Ọ nwekwara ike ijikwa ma gbanwee ntụziaka nke ọkụ ọkụ iji melite arụmọrụ na ndụ nchekwa nke ngwaahịa.

      ajujunkọwa
    • 3M scotch 665 okpukpu abụọ mkpuchi transperent UPVC ihe nkiri repositionable teepu

      3M scotch 665 okpukpu abụọ mkpuchi transperent UPVC ihe nkiri repositionable teepu

       

      3M 665bụ teepu na-enweghị mkpuchi mkpuchi okpukpu abụọ nke na-eji 1.4mil doro anya ihe nkiri UPVC dị ka onye na-ebu ya na sistemụ nrapado acrylic dị iche iche n'akụkụ abụọ.A na-ekpuchi akụkụ ihu na 3M acrylic adhesive 400, nke nwere ezigbo mma mmalite na ike bee n'ụdị dị iche iche ma ọ bụ ihe ndị yiri ya dị ka ọla, iko, osisi, akwụkwọ, agba, na ọtụtụ plastik.A na-ekpuchi azụ azụ na 3M acrylic acrylic adhesive 1070 system, nke bụ ihe ntanye na-edozi ahụ iji nye njikọ siri ike, ọ na-enye ohere ka ọ dị mfe wepụ mmanụ, ihe nkiri na ihe ndị ọzọ na-enweghị ịhapụ ihe fọdụrụnụ.Onye na-ebu ihe nkiri UPVC pụrụ iche na-enye ntinye teepu maka ịcha na ịnwụ anwụ, ihe owuwu plastik zuru oke dịkwa mma maka usoro pụrụ iche dị ka ịcha waya na-ekpo ọkụ maka ụfụfụ na ngwa nkwakọba plastik.

      ajujunkọwa
    • Atọ oyi akwa waterproof onuete sealing sewn teepu maka mmiri suut na mmiri mmiri akụrụngwa

      Atọ oyi akwa waterproof onuete sealing sewn teepu maka mmiri suut na mmiri mmiri akụrụngwa

       

      Atụnyere yatansculent onuete teepu, nkeSeam Akara teepu Waterproofbụ ihe mejupụtara ihe dị iche iche nke na-eji ihe nkiri TPU na-egbochi mmiri na nrapado ọkụ na-arụ ọrụ n'otu akụkụ.The atọ oyi akwa seams teepu na-agbakwunyekwa akwa ume iku ume ka onye na-akwado ya.A na-etinye ya na akwa akwa akwa site na iji igwe ikuku na-ekpo ọkụ iji gbochie mmiri ịfesa n'oghere ndị ahụ.Enwere ike itinye teepu akara Seam na ngwa dị iche iche gụnyere uwe mwụda, uwe ọrụ ụlọ ọrụ mmepụta ihe, ụlọikwuu, wader, akpụkpọ ụkwụ na uwe agha.N'iji ezigbo mmachi akwa na akwa na-arụ ọrụ dị arọ, a ga-ejikarị teepu a na-ejikarị akwa akwa na akwa akwa akwa maka ngwọta dị mma maka ngwa agha.A nwekwara ike iji akara ụlọ ọrụ bipụta teepu mkpuchi nke seam ma ọ bụ ihe pụrụ iche.

      ajujunkọwa
    • Translucent waterproof & windproof okpomọkụ na-arụ ọrụ seam sealing teepu maka mmepụta uwe n'èzí

      Translucent waterproof & windproof okpomọkụ na-arụ ọrụ seam sealing teepu maka mmepụta uwe n'èzí

       

      translucentMpempe akwụkwọ akara Seamwuru site na ihe mejupụtara otu oyi akwa PU nwere nrapado na-arụ ọrụ ọkụ n'otu akụkụ.Ọ na-namd dị ka abụọ layered onuete sealing, na ọkpụrụkpụ nwere ike mere si 0.06mm-0.12mm.Ọ nwere ike inye aka igbachi na mechie ọnụ nke dị n'etiti oghere ndị a na-adụnye ma ọ bụ nkedo ma gbochie ịbanye mmiri ma ọ bụ ikuku.Teepu translucent nwere ike ịmepụta ezigbo ọnụ mmiri gwụchara mgbe etinyere ya na mpaghara nkwonkwo uwe.A na-etinye ya n'ọtụtụ ebe na uwe dị n'èzí dị ka jaket mmiri na-adịghị, ịrị elu, uwe ski, ụlọikwuu ịma ụlọikwuu, akpa ụra na akpa rọba / akpa azụ, wdg.

      A pụkwara itinye teepu ahụ n'ụlọ n'ụzọ dị mfe na ígwè ezinụlọ.

      ajujunkọwa
    • Usoro ihe nkpuchi ụfụfụ 3M RP16 RP25 RP32 RP45 RP62

      Usoro ihe nkpuchi ụfụfụ 3M RP16 RP25 RP32 RP45 RP62

       

      Nke3M VHB Foam teepuusoro 3M RP16 RP25 RP32 RP45 RP62 mejupụtara agba ntụ na-adịgide adịgide acrylic adhesive oyi akwa na 0.4mm / 0.6mm / 0.8mm / 1.1mm / 1.55mm ọkpụrụkpụ na-acha ọcha ok kraft akwụkwọ dị ka mkpụrụ.Ọ na-enye mgbanwe imewe ya na ike viscoelasticity ya na ụzọ njikọ dị mma maka ụdị dị iche iche, dị ka ọla dị iche iche, ihe mejupụtara, ABS, acrylic, paints na iko wdg.Teepu ụfụfụ 3M VHB bụ ihe egosipụtara na skru, rivets, welds na ụdị ndị ọzọ nke igwe eji arụ ọrụ.A na-ejikarị ya na ngwa ụlọ ọrụ n'ozuzu, gụnyere ụgbọ njem, ngwa ngwa, ngwá electronic, ihe owuwu, na ngwa ụlọ.

      ajujunkọwa
    • Igwe ọkụ Bird Shock teepu nwere aluminom na-agbanwe agbanwe maka njikwa nnụnụ na Ugbo, Roofs

      Igwe ọkụ Bird Shock teepu nwere aluminom na-agbanwe agbanwe maka njikwa nnụnụ na Ugbo, Roofs

       

      Eletrikiteepu Nnụnụ ujona-eji teepu VHB Foam doro anya dị ka ntọala ma tinye ya na waya aluminom na-agbanwe agbanwe.Igwe aluminom na-enye dị ka ọrụ nduzi iji jikọọ na chaja eletrik iji mee ka nnụnụ ahụ pụọ n'elu ụlọ gị, ọkpọkọ ma ọ bụ ihe mgbochi.Enwere ike ịgbanye chaja eletrik site na anyanwụ ma ọ bụ plọg 110-volt, ọ ga-eme ka ihe na-adịghị njọ, dị ka static na-atụ egwu nnụnụ, nnụnụ ahụ ga-efepụ mgbe ọ na-emetụ static ujo.Na mgbanwe VHB ụfụfụ isi, teepu nwere ike ịdị mfe itinye na dị iche iche na-ekwekọghị n'elu na ihe ndị dị ka shingles, ígwè, ígwè, aluminum, PVC, osisi, plastic, marble, nkume, wdg.

      ajujunkọwa
    • Igwe anaghị agba nchara EVA Foam Igwe anaghị egbochi mmiri na-ewepụ teepu maka ọnụ ụzọ na mkpuchi windo.

      Igwe anaghị agba nchara EVA Foam Igwe anaghị egbochi mmiri na-ewepụ teepu maka ọnụ ụzọ na mkpuchi windo.

       

      GBS ihe mgbochi ọkụEVA Foam teepuna-eji 0.5mm-15mm gburugburu ebe obibi mechiri emechi cell EVA foam dị ka onye na-ebu mkpuchi nwere otu akụkụ ma ọ bụ ihe mgbaze acrylic nwere akụkụ abụọ ma ọ bụ nrapado na-ekpo ọkụ ma jikọta ya na akwụkwọ ntọhapụ.Anyị nwere ike iji 3M 9448A ma ọ bụ 3M 9495LE kpuchie ya teepu dị ka onye ahịa rịọrọ.Nnukwu njupụta EVA ụfụfụ teepu nwere ọmarịcha akara na ihe na-adịghị emetụ n'ahụ, ọ na-egosipụtakwa nguzogide ihu igwe, nguzogide mmanụ, nguzogide corrosion na nnabata ụda.A na-arụkarị ya dị ka ijikọ, ndochi, akara na ịrịgo na ngwa dị iche iche dị ka mkpuchi ọnụ ụzọ na windo, ndochi oghere, nchekwa arịa ụlọ, ihe mkpuchi ụlọ.A na-ejikwa ya na mgbakọ maka akụrụngwa eletrọnịkị ma ọ bụ ihe ndozi ime ụlọ ma ọ bụ mpụta.

      ajujunkọwa
    << < gara aga456789Ọzọ >>> Peeji nke 6/9